An ISO 9001:2000 Certified Company

Sterilizers

Product Range

Sterilizers

Sterilizing & Depyrogenating Tunnel

	Each independent filter plenum is provided with filter integrity sample ports.
	The equipment’s conveyor belt is monitored and alarm status is activated if it operates outside the belt speed set points.
	Provision for ports to allow introduction of validation thermocouples in each zone.
	The tunnel is provided with fully integrated ampoule / vial flow control logic to allow automatic stops and restarts of the equipment.
	All filter modules have differential pressure gauges to monitor pressure. Pressure switches with high and low alarms
	When the tunnel is not in use it can be operated in night-mode to save energy while preventing contamination.
	Harsiddh tunnels have identical design concept but with different output capacities, available in more than 8 models and a wide range of options.
	Cooling system for the cooling zone.
	Sterilizing of the cooling zone.
	Automatic air balancing between aseptic and non-aseptic area of the tunnel.
	Shutter positioning monitoring and automatic adjustment are some of the options available to meet specific customer requirements.

Process Chambers :
Drying Zone
Glass containers entering the drying zone from the up-line washer are treated with clean vertical laminar air,vaporizes the moisture, pre-heats the containers and protect hot air back-flow from the hot zone.
Hot Zone
Glass containers then enter the hot zone and are subjected to a thermal cycle of sterilization and depyrogenation.
Cooling Zone
Glass containers further enter the cooling zone, where they are subjected to cold laminar air to bring downthe temperature before entering the aseptic area.
Automation
PLC Controlled and equipped with touch screen colour graphics display for easy operator access to control screens and statistics, data storage and retrieval. Data management system is 21 CFR part II compliant . Data screens feature, set parameters and current process parameters. Set parameters are stored in the form of recipes which are password protected and can be uploaded to current status as and when new type of glass containers are being processed. Diagnostic screen highlight alarm conditions of the tunnel to enable the operator to minimize production down time.
Belt Width :
300mm, 450mm & 600mm
Installed Power :
300mm – 34 kw.	450mm - 37 kw.
600mm – 56 kw.
Power Specification :
3 Phase, 4 Wire System
Control Voltage :
24 VAC/DC
Overall Dimension :
3700mm (L) X 1275mm (W) X 2350mm (H)


	Washing Machines : Automatic Linear Vial Washer \| Automatic Vertical Rotary Ampoule & Vial Washing Machine \| Automatic Linear Vial Washing Machine \| Automatic Linear Bottle Washing Machine \| Multijet Ampoule & Vial Washing Machine \| Rotary Bottle Washing Machine Sterilizers : Sterilizing & Depyrogenating Tunnel \| Dry Heat Sterilizer Liquid Filling Machines : High Speed Automatic Ampoule Filling & Sealing Machine \| Automatic Ampoule Filling & Sealing Machine \| Automatic Vial Filling with Rubber Stoppering Machine \| Automatic Volumetric Liquid Bottle Filling Machine \| Automatic Monoblock Liquid Bottle Filling with ROPP / Screw Capping Machine \| Automatic Single Head Ampoule Filling & Sealing Machine - (R&D Model) Powder Filling Machines : Injectable Powder Filling with Rubber Stoppring Machine \| Automatic Dry Syrup Powder Filling Machine Capping Machines : Automatic Vial PP / Flip-off Cap Sealing Machine \| Automatic Bottle Screw / ROPP Capping Machine Labeling Machines : Automatic Self Adhesive Ampoule Sticker Labeling Machine \| Automatic Self Adhesive Vials & Bottle Sticker Labeling Machine \| Automatic Horizontal Ampoule & Vial Labeling Machine \| Automatic Wet Glue Bottle Labeling Machine \| High Speed Automatic Self-Adhesive Ampoule Sticker Labeling Machine